Painting the walls in the bathroom is a simple, quick, budget option. Many people mistakenly believe that in this way it is impossible to create an elite, expensive interior. There are many variations of surface painting, most of which are not without a share of creativity. As a result, you can get an original design of the walls, created by yourself. It is difficult for the average person to distinguish such a design from copyright projects. We will consider the numerous ways of using coloring compounds in the bathroom and learn how to choose them correctly for a room with such a difficult microclimate.
Ceramic tiles are considered a traditional coating for the surface of the walls in the bathroom. The material really worked well in the last century and has passed the test of time. However, despite all the variety of colors, ornaments and shapes that manufacturers now offer, the tile is still slightly "boring." Wall painting began to be practiced in a number of Western countries, from where this fashion came to us. Paint has a lot of advantages, among which it is worth noting:
The purchase of a substance will be much cheaper than the purchase of tiles. Working with the material is also much easier. It is enough to stock up with brushes and masking tape, which will prevent smearing of the composition in other areas of the wall.
Variety of use cases. It is not necessary to paint the entire wall with paint of the same color. You can resort to a number of design decisions: creating gradation of shades, decorative painting, combination with tile.
The frozen paint layer is easy to wash, just wipe it with a damp sponge a couple of times a week.
The disadvantages of using paint to cover the walls in the bathroom include:
The need for preliminary surface leveling. The painting composition will only emphasize the unevenness of the wall, so it will have to be carefully prepared using putty, primer.
Paint is not recommended for use in those bathrooms where there is no good ventilation. Although moisture resistant formulations are one step higher than normal, they are not yet able to withstand moisture in the same way as ceramics.In poorly ventilated rooms, sooner or later the walls will begin to damp, which will lead to the appearance of fungi and mold.
The paint layer is not resistant to mechanical damage, like ceramic tiles. One hit is enough for a piece of coating to crack or even break off. It is easy to remove the paint and paint the wall again in a different color. This relative advantage will be highly appreciated by those who prefer to radically change the interior once every couple of years.
Many of our compatriots painted walls cause persistent associations with the "official" blue or green color, which is so often covered with porches. In fact, the range of colors of the paint is rich and varied.
The choice of paint for wall decoration
First of all, when choosing a paint, pay attention to the appearance of the coating. There is a classification of compounds according to this criterion:
Matt Paints with this effect perfectly mask wall defects and give the shade depth.
Glossy. This type has a more presentable appearance, is more resistant to moisture, but at the same time emphasizes the slightest bumps in the walls.
Semi-matt. Intermediate between gloss and matte finish.
Textured. They give a roughness to the coating, which looks great in combined versions with ordinary glossy or matte paints. Perfectly mask irregularities.
However, it is much more important for the room not the appearance of the coating, but the composition of the coloring matter. The ability of the paint to withstand regular contact with moisture and elevated temperature largely depends on this, which is considered the norm for the bathroom. Depending on the production technology and compositions, moisture-resistant paints are classified into the following types:
Water emulsion.
Latex based paints.
Acrylic.
Based on silicone.
A group of alkyd paints.
Chlorinated rubber compounds.
Oil paints.
Consider the disadvantages and advantages of each type of moisture-resistant paints.
Water emulsion: pros and cons
Water-based paint dries very quickly after application to the surface. The composition is absolutely safe for humans, does not have a pungent, unpleasant odor. Water-based paint is easy to give a special shade by adding a special pigment to the jar. They are sold at any hardware store. Of the disadvantages, only the need to comply with certain conditions during the staining process can be noted: the room temperature should not be lower than 5 degrees, otherwise the paint will not “seize”. The composition includes:
Antiseptic.
Thickener.
Latex.
Filler.
Water-based paints are classified into the following types:
Acrylic In addition to latex, acrylic is also added to the composition, which gave the name to a subgroup of paints. This type is considered the most common among water emulsions. Thanks to the combination of latex and acrylic, the surface gains increased resistance to water. When applying two layers, masking of cracks is possible.
Mineral They are made on the basis of slaked lime or concrete. Typically used for exterior and interior use with brick or concrete walls, suitable for ceilings. Of the shortcomings, only a short service life is noted. Mineral paints do not show sensitivity to moisture, grease, light and temperature changes.
Silicate. They are made on the basis of liquid glass. They have high air and vapor permeability. They withstand moisture well, but their protective qualities deteriorate if the humidity of the room is significantly different from that of the surface on which the coating was applied. Relate to the "long-livers" among the paints, as the service life reaches 20 years.
Silicone They are made on the basis of silicone resins. At the cost of leading the "rating" of the most expensive waterborne paints.They belong to the type of vapor-permeable compounds, therefore they are ideally suited for finishing "wet" walls.
Before use, water-based paints must be thoroughly mixed to obtain a uniform color. According to the instructions, they are even allowed to add small portions of water. The tools after painting are easily washed from the composition, which makes this type of coloring matter even more attractive to the buyer.
Latex
If in water-based paints the ingredients are combined using various resins, then in latex paints this role is assigned to the substance of the same name. Latex bonds pigments and water, which evaporates when dried. In parallel, the binder particles combine to form a thin but strong film. Latex paints also do not emit an unpleasant odor, dry out within two hours, let air through, so you can not be afraid of the formation of bubbles on the surface. They calmly withstand constant contact with moisture, regular washing; possess high abrasion resistance and good adhesion to any type of surface. Unfortunately, latex paints are quite expensive and often become a hotbed for fungi and mold. The last problem is easily solved with an antiseptic primer, which is applied to the wall or ceiling immediately before painting.
Acrylic
This type of paint is made on the basis of acrylic, which becomes clear from the name. They are highly resistant to moisture and direct sunlight. Even a couple of years after the repair, the surface does not fade. However, acrylic paints are characterized by a darkening of the color after the layer dries. This nuance must be taken into account when choosing the shade of the composition. Unlike oil paints, they do not crack. Acrylic compositions without water have increased strength and are often used for outdoor applications.
Silicone
Silicone based paints are relatively recent. This group of compounds has a high cost. The price is offset by the characteristics of the paints and a wide range of their application. They are moisture resistant, but vapor permeable, due to which they provide natural air exchange in the room and do not allow the walls to damp. Silicone paints are insensitive to sudden changes in temperature (including frost), exposure to sunlight. They do not crack and do not swell with “bubbles” when stained. Silicone paints dry quickly enough, do not spread an unpleasant odor and are completely safe for humans.
Characteristics of chlorinated rubber waterproof paint
Chlorinated rubber paints appeared on the market not so long ago, but they have already established themselves as an excellent option for combining low cost and high performance. They are made from a mixture of pigments, a solvent and a white powder called chlorinated rubber (the final reaction product between chlorine and rubber). Such structures cover the walls not in the bathrooms, but in the rooms where the pools are located, or in saunas, bathhouses. The fact is that in terms of resistance to moisture, chlorinated rubber paints have no competitors. However, the composition is able to change the consistency after the surface has dried. When the temperature rises to 60 degrees, it softens, and when it decreases, it hardens. If the air in the room becomes even hotter, then there is a risk of decomposition of the composition with the release of hydrochloric acid vapor.
Chlorinated rubber paints are usually used in the decoration of industrial facilities. During the drying of the composition, chemical reactions do not occur. Chlorinated rubber simply freezes after evaporation of the solvent. The resistance of the paint to the effects of the latter is very low. Because of this, the first layer may soften after applying the second.Manufacturers often add small pieces of aluminum to the composition, which create an original decorative effect and increase the strength of the coating.
Alkyd
Alkyd paints have high adhesion and are used to cover almost any surface: concrete, wood, metal. In the latter case, the composition prevents the development of corrosion. Paints are made on the basis of alkyd varnish. When dried, they can release toxic substances, so the bathroom should be well ventilated. There are two varieties of alkyd varnishes:
Pentaphthalic.
Gliftal.
Pentaphthalic varnish is used for the production of alkyd paints more often, since during cold drying it contributes to faster hardening of the composition, and the resulting film becomes stronger than a layer with a glyphthalic base. In other cases, glyphthalic varnish hardens faster. When choosing alkyd paint, you should pay attention to its fat content. The density of the composition, the hardness and elasticity of the coating, and the drying rate depend on this indicator.
Features of the use of oil paints for bathroom decoration
Oil paints are made on the basis of drying oil. This variety can be called “greetings from the past”, because before the appearance of acrylic, alkyd, silicone and latex compounds, it simply had no competitors. Half a century ago, oil paints were universally used for painting walls both inside and outside. The main drawback of the composition is a very long drying time. In a bathroom with high humidity, this process can even drag on for several days.
During drying, the composition exudes a sharp, unpleasant odor, so the room will have to be ventilated for a long time. Although oil paints adequately withstand the test of high humidity, they are not recommended for use in decorating the bathroom, since after a year or two the coating will begin to crack and it will be necessary to re-carry out repairs.
How to prepare walls for painting
The application of the coloring composition to the wall is preceded by a preparatory phase.The surface must be cleaned from the layer of the old coating, leveled with putty, apply plaster, primer and antiseptic. The complexity of the task depends on the type of wall surface. Preparation of bare brick is considered the most time-consuming. It is necessary to beat off the remains of cement mortar and, possibly, cover the wall with a reinforcing mesh. The easiest way to work with a plastered surface.
Recommendations and methods for removing old paint from walls
If the wall has already been painted, then it must be completely cleaned of the remnants of the composition, which will create bumps and roughness on the surface. It is now easy to purchase a special solvent on the market. With a brush, it is evenly distributed over the entire surface and left for a couple of hours. When the composition penetrates deep into the paint layer and softens it, you can proceed to cleaning the wall.
To do this, you need a regular scraper or spatula. For some types of paint, special solvents are sold that effectively soften only the specific composition. Sometimes, the old layer “eats” so much into the wall that it has to be removed using tools such as a grinder or a soldering iron. In the first case, the entire room will quickly fill up with small particles of paint and plaster, and in the second case, with strong heating, toxic substances can be released. For this reason, the solvent is considered the safest and most reliable option.
Tools for coloring: their advantages and disadvantages
The following tools can be used to paint the surface:
Brushes of different stiffness and width. Suitable for processing small, hard-to-reach areas (area behind the toilet, shower or bathtub). They can leave ugly “strokes” and smudges, which violates the uniformity of the surface.
Rollers. Used to cover large areas. They allow you to quickly process the wall area and at the same time give a uniform layer. It is better to use foam rubber rollers.
Spray guns. This group includes spray guns and spray guns. Tools work according to a similar principle: they spray the composition at a certain distance from the surface under air pressure. Give a uniform coating. A person himself regulates the degree of staining and the amount of paint that is spent on every square centimeter. To reduce the consumption of the composition, simply increase the distance between the wall and the atomizer. Recommended to work in a respirator or a special mask.
The most modern option are spray guns. They are used not only for painting walls, but also for furniture of complex configuration. If a combination of several colors is used, then use masking tape, which delimits individual areas.
Ink Technology
Let us consider in stages the technology of applying paints to the wall using a roller:
First you need to clearly distinguish between the staining area. It is indicated by strips of paint drawn indented a few cm from the border.
Now you need to dilute the paint and pour a small portion into a special container (two-section trough) for the rollers.
Then the roller is wetted in paint, the excess of which is removed by trial rolling of the tool on a special ribbed surface of the container.
Now the paint is applied to the wall with a roller. The movements must be continuous. The tool is moved along the vertical axis: up and down.
When the paint on the roller begins to finish, they are repeated on the already-treated surface in order to remove the resulting stains.
Now the roller is re-wetted in the paint and the whole procedure is repeated again with the adjacent wall section.
Work should be either in a well-lit room or in daylight. So you can immediately notice the flaws and timely eliminate them. Borders and small details are painted last. For painstaking work, it is better to replace the roller with a brush.
Paint consumption
Paint consumption will help to purchase the right amount of composition for finishing a specific area. This indicator is always indicated on the jar. As a rule, manufacturers calculate the approximate surface area that can be covered with a single layer of the presented paint. These data are considered approximate. Allowable calculation error depends on the wall material, the number of paint layers, the degree of dilution, compositional features, application tool and even the environmental conditions in which the painting work will be carried out. For an ideal value, it is considered to be a consumption of 1 liter per 5 square meters in one layer. To measure the area of a wall, you will need to multiply its height by width. Do not forget to add borders, a fillet or small decorative elements.
Design in different styles
Wall painting in the bathroom is suitable for a line of modern styles, as well as for a number of classic and ethnic trends. Silver paint is perfect for high tech. Brick walls, traditional for a loft, are easily transformed with the help of white, blue or soft brown shades. For Art Nouveau, you can use a combination of ombre technique (gradation of color) and wavy lines at the points of transition of tones. For ethnic areas, painted walls are excellently suited, the surface of which is additionally decorated with decorative painting with national motifs. For example, for the bathroom in the Egyptian or African style, characteristic angular patterns are suitable. The Moorish or Moroccan interior is decorated with elegant ligature, made in blue, brown and green colors. For a bathroom in the Russian style, use painting.
When using paints, much attention is paid to the types of finishing materials that were used to cover the floor and ceiling. They should be combined not only in color, but also in texture. Creating competent combinations, you can accentuate a particular area in the room or vice versa, mask a separate area,making her neutral.
Decorative painting methods
In addition to the classic solid staining, when working with paint, you can use a number of special tools for original techniques:
Stencils. They are used to apply drawings over a layer of dried paint.
The effect of "star" dust is obtained by spraying a different color of paint with a stiff brush, which is squeezed out well before the procedure. This technique looks beautiful and stylish on dark walls (purple, blue) if light or silver paint is sprayed.
The effect of aging or stippling. It is applied to completely dried surfaces. Glaze is applied on top of the paint layer. Until the composition has hardened, it is artistically smeared on the surface with a sponge. As a result, the lower layer of paint is gradually exposed.
Contrast staining. To work, you need paints of different colors and supplies of masking tape. Masking tape restricts individual areas that are painted in different shades. The technique is often used to create complex geometric patterns.
"Chaos of strokes." For work, use a rag roller made by yourself. Pieces of fabric are wound onto the holder so that as many folds and knots as possible are obtained. An already dried paint layer is applied a new shade with this tool. It turns out an original, abstract pattern.
The effect of wrinkled skin. Sheets of thin decorative paper are applied to freshly applied paint. It is crushed and allowed to dry. After that, the surface is repainted. The wall takes on a characteristic relief. To get the effect of ordinary skin, use a homemade suede roller. It is convenient for them to form the desired relief on a fresh surface.
Textured staining. It is used as an analogue of Venetian plaster. For work, use a special roller.
In the latter case, you can additionally use a colored primer or pearlescent glaze, which give a simply amazing effect if their shade is correctly matched to the tone of the base paint.
Using decorative plaster for wall decoration in the bathroom
For the bathroom, a special moisture-resistant decorative plaster is used. The material is sold dry. The basis of the substance is made up of polymers, to which decorative particles and even crushed pieces of natural stone are added. As a rule, textured plaster imitates the surface of granite or marble. The coating can be used as a finish or combined with paint. Textured plaster ideally hides wall surface defects, while ennobling the interior of the bathroom. Such a coating is not afraid of exposure to moisture, sunlight and temperature surges. Some manufacturers offer plaster, which simultaneously plays the role of insulation, which is suitable for rooms with insufficient heating.
Mistakes to Avoid
When painting walls, you should avoid a number of mistakes that are often made by beginners in the painting business:
Do not paint on an unprepared wall. Perhaps the coating for some time really will serve faithfully, but its appearance will leave much to be desired.
If the work starts from a certain area, it is not recommended to drastically change the staining zones, running from one corner to another. You need to paint the wall sequentially, slowly moving along the selected direction.
The coloring composition also needs to be prepared: stir, add pigments if necessary, add water or mineral spirit if its consistency is too thick.
Pay attention to the expiration date of the paint. Some compounds can only slightly thicken over time, but at the same time completely lose most of their properties.This cannot be visually determined, but after application and during operation, all the flaws will manifest in all its glory.
For the best adhesion of the coating to the surface, a primer must be used.
You can not carry out further finishing work if the paint has not yet dried.
They also do not recommend experimenting with chaotic application of paint to the surface, unless of course, this is not part of the process of original wall decoration.
Conclusion
More and more apartment owners began to use paint for decorating walls and ceilings in bathrooms. Western designers have shown that this method of decoration has a lot of advantages, among which an attractive price does not last. It is easy to carry out various manipulations with the paint, achieving original effects that simply cannot be embodied with tiles or decorative panels. This option is definitely suitable for fantasy designers who are not afraid to experiment for the sake of obtaining author's design.
Painting the walls in the bathroom is a simple, quick, budget option. Many people mistakenly believe that in this way it is impossible to create an elite, expensive interior. There are many variations of surface painting, most of which are not without a share of creativity. As a result, you can get an original design of the walls, created by yourself. It is difficult for the average person to distinguish such a design from copyright projects. We will consider the numerous ways of using coloring compounds in the bathroom and learn how to choose them correctly for a room with such a difficult microclimate.
Content
Pros and cons of coloring a bathroom
Ceramic tiles are considered a traditional coating for the surface of the walls in the bathroom. The material really worked well in the last century and has passed the test of time. However, despite all the variety of colors, ornaments and shapes that manufacturers now offer, the tile is still slightly "boring." Wall painting began to be practiced in a number of Western countries, from where this fashion came to us. Paint has a lot of advantages, among which it is worth noting:
The disadvantages of using paint to cover the walls in the bathroom include:
It is easy to remove the paint and paint the wall again in a different color. This relative advantage will be highly appreciated by those who prefer to radically change the interior once every couple of years.
The choice of paint for wall decoration
First of all, when choosing a paint, pay attention to the appearance of the coating. There is a classification of compounds according to this criterion:
However, it is much more important for the room not the appearance of the coating, but the composition of the coloring matter. The ability of the paint to withstand regular contact with moisture and elevated temperature largely depends on this, which is considered the norm for the bathroom. Depending on the production technology and compositions, moisture-resistant paints are classified into the following types:
Consider the disadvantages and advantages of each type of moisture-resistant paints.
Water emulsion: pros and cons
Water-based paint dries very quickly after application to the surface. The composition is absolutely safe for humans, does not have a pungent, unpleasant odor. Water-based paint is easy to give a special shade by adding a special pigment to the jar. They are sold at any hardware store. Of the disadvantages, only the need to comply with certain conditions during the staining process can be noted: the room temperature should not be lower than 5 degrees, otherwise the paint will not “seize”. The composition includes:
Water-based paints are classified into the following types:
Before use, water-based paints must be thoroughly mixed to obtain a uniform color. According to the instructions, they are even allowed to add small portions of water. The tools after painting are easily washed from the composition, which makes this type of coloring matter even more attractive to the buyer.
Latex
If in water-based paints the ingredients are combined using various resins, then in latex paints this role is assigned to the substance of the same name. Latex bonds pigments and water, which evaporates when dried. In parallel, the binder particles combine to form a thin but strong film. Latex paints also do not emit an unpleasant odor, dry out within two hours, let air through, so you can not be afraid of the formation of bubbles on the surface. They calmly withstand constant contact with moisture, regular washing; possess high abrasion resistance and good adhesion to any type of surface. Unfortunately, latex paints are quite expensive and often become a hotbed for fungi and mold. The last problem is easily solved with an antiseptic primer, which is applied to the wall or ceiling immediately before painting.
Acrylic
This type of paint is made on the basis of acrylic, which becomes clear from the name. They are highly resistant to moisture and direct sunlight. Even a couple of years after the repair, the surface does not fade. However, acrylic paints are characterized by a darkening of the color after the layer dries. This nuance must be taken into account when choosing the shade of the composition. Unlike oil paints, they do not crack. Acrylic compositions without water have increased strength and are often used for outdoor applications.
Silicone
Silicone based paints are relatively recent. This group of compounds has a high cost. The price is offset by the characteristics of the paints and a wide range of their application. They are moisture resistant, but vapor permeable, due to which they provide natural air exchange in the room and do not allow the walls to damp. Silicone paints are insensitive to sudden changes in temperature (including frost), exposure to sunlight. They do not crack and do not swell with “bubbles” when stained. Silicone paints dry quickly enough, do not spread an unpleasant odor and are completely safe for humans.
Characteristics of chlorinated rubber waterproof paint
Chlorinated rubber paints appeared on the market not so long ago, but they have already established themselves as an excellent option for combining low cost and high performance. They are made from a mixture of pigments, a solvent and a white powder called chlorinated rubber (the final reaction product between chlorine and rubber). Such structures cover the walls not in the bathrooms, but in the rooms where the pools are located, or in saunas, bathhouses. The fact is that in terms of resistance to moisture, chlorinated rubber paints have no competitors. However, the composition is able to change the consistency after the surface has dried. When the temperature rises to 60 degrees, it softens, and when it decreases, it hardens. If the air in the room becomes even hotter, then there is a risk of decomposition of the composition with the release of hydrochloric acid vapor.
Chlorinated rubber paints are usually used in the decoration of industrial facilities. During the drying of the composition, chemical reactions do not occur. Chlorinated rubber simply freezes after evaporation of the solvent. The resistance of the paint to the effects of the latter is very low. Because of this, the first layer may soften after applying the second.Manufacturers often add small pieces of aluminum to the composition, which create an original decorative effect and increase the strength of the coating.
Alkyd
Alkyd paints have high adhesion and are used to cover almost any surface: concrete, wood, metal. In the latter case, the composition prevents the development of corrosion. Paints are made on the basis of alkyd varnish. When dried, they can release toxic substances, so the bathroom should be well ventilated. There are two varieties of alkyd varnishes:
Pentaphthalic varnish is used for the production of alkyd paints more often, since during cold drying it contributes to faster hardening of the composition, and the resulting film becomes stronger than a layer with a glyphthalic base. In other cases, glyphthalic varnish hardens faster. When choosing alkyd paint, you should pay attention to its fat content. The density of the composition, the hardness and elasticity of the coating, and the drying rate depend on this indicator.
Features of the use of oil paints for bathroom decoration
Oil paints are made on the basis of drying oil. This variety can be called “greetings from the past”, because before the appearance of acrylic, alkyd, silicone and latex compounds, it simply had no competitors. Half a century ago, oil paints were universally used for painting walls both inside and outside. The main drawback of the composition is a very long drying time. In a bathroom with high humidity, this process can even drag on for several days.
During drying, the composition exudes a sharp, unpleasant odor, so the room will have to be ventilated for a long time. Although oil paints adequately withstand the test of high humidity, they are not recommended for use in decorating the bathroom, since after a year or two the coating will begin to crack and it will be necessary to re-carry out repairs.
How to prepare walls for painting
The application of the coloring composition to the wall is preceded by a preparatory phase.The surface must be cleaned from the layer of the old coating, leveled with putty, apply plaster, primer and antiseptic. The complexity of the task depends on the type of wall surface. Preparation of bare brick is considered the most time-consuming. It is necessary to beat off the remains of cement mortar and, possibly, cover the wall with a reinforcing mesh. The easiest way to work with a plastered surface.
Recommendations and methods for removing old paint from walls
If the wall has already been painted, then it must be completely cleaned of the remnants of the composition, which will create bumps and roughness on the surface. It is now easy to purchase a special solvent on the market. With a brush, it is evenly distributed over the entire surface and left for a couple of hours. When the composition penetrates deep into the paint layer and softens it, you can proceed to cleaning the wall.
To do this, you need a regular scraper or spatula. For some types of paint, special solvents are sold that effectively soften only the specific composition. Sometimes, the old layer “eats” so much into the wall that it has to be removed using tools such as a grinder or a soldering iron. In the first case, the entire room will quickly fill up with small particles of paint and plaster, and in the second case, with strong heating, toxic substances can be released. For this reason, the solvent is considered the safest and most reliable option.
Tools for coloring: their advantages and disadvantages
The following tools can be used to paint the surface:
The most modern option are spray guns. They are used not only for painting walls, but also for furniture of complex configuration. If a combination of several colors is used, then use masking tape, which delimits individual areas.
Ink Technology
Let us consider in stages the technology of applying paints to the wall using a roller:
Work should be either in a well-lit room or in daylight. So you can immediately notice the flaws and timely eliminate them. Borders and small details are painted last. For painstaking work, it is better to replace the roller with a brush.
Paint consumption
Paint consumption will help to purchase the right amount of composition for finishing a specific area. This indicator is always indicated on the jar. As a rule, manufacturers calculate the approximate surface area that can be covered with a single layer of the presented paint. These data are considered approximate. Allowable calculation error depends on the wall material, the number of paint layers, the degree of dilution, compositional features, application tool and even the environmental conditions in which the painting work will be carried out. For an ideal value, it is considered to be a consumption of 1 liter per 5 square meters in one layer. To measure the area of a wall, you will need to multiply its height by width. Do not forget to add borders, a fillet or small decorative elements.
Design in different styles
Wall painting in the bathroom is suitable for a line of modern styles, as well as for a number of classic and ethnic trends. Silver paint is perfect for high tech. Brick walls, traditional for a loft, are easily transformed with the help of white, blue or soft brown shades. For Art Nouveau, you can use a combination of ombre technique (gradation of color) and wavy lines at the points of transition of tones. For ethnic areas, painted walls are excellently suited, the surface of which is additionally decorated with decorative painting with national motifs. For example, for the bathroom in the Egyptian or African style, characteristic angular patterns are suitable. The Moorish or Moroccan interior is decorated with elegant ligature, made in blue, brown and green colors. For a bathroom in the Russian style, use painting.
When using paints, much attention is paid to the types of finishing materials that were used to cover the floor and ceiling. They should be combined not only in color, but also in texture. Creating competent combinations, you can accentuate a particular area in the room or vice versa, mask a separate area,making her neutral.
Decorative painting methods
In addition to the classic solid staining, when working with paint, you can use a number of special tools for original techniques:
In the latter case, you can additionally use a colored primer or pearlescent glaze, which give a simply amazing effect if their shade is correctly matched to the tone of the base paint.
Using decorative plaster for wall decoration in the bathroom
For the bathroom, a special moisture-resistant decorative plaster is used. The material is sold dry. The basis of the substance is made up of polymers, to which decorative particles and even crushed pieces of natural stone are added. As a rule, textured plaster imitates the surface of granite or marble. The coating can be used as a finish or combined with paint. Textured plaster ideally hides wall surface defects, while ennobling the interior of the bathroom. Such a coating is not afraid of exposure to moisture, sunlight and temperature surges. Some manufacturers offer plaster, which simultaneously plays the role of insulation, which is suitable for rooms with insufficient heating.
Mistakes to Avoid
When painting walls, you should avoid a number of mistakes that are often made by beginners in the painting business:
They also do not recommend experimenting with chaotic application of paint to the surface, unless of course, this is not part of the process of original wall decoration.
Conclusion
More and more apartment owners began to use paint for decorating walls and ceilings in bathrooms. Western designers have shown that this method of decoration has a lot of advantages, among which an attractive price does not last. It is easy to carry out various manipulations with the paint, achieving original effects that simply cannot be embodied with tiles or decorative panels. This option is definitely suitable for fantasy designers who are not afraid to experiment for the sake of obtaining author's design.